JZL60 Piling Machine

Product Detail

Shandong Huaxia Group Co.,Ltd is one of the leading China JZL60 piling machine manufacturers, we are able to offer you JZL60 piling machine mast section, cab or boom, welcome to contact our factory.

bore diameter400-600mm  bore depth25m

		JZL60
The walking mode		Dynamoelectric-pedrail
The support-mode of the stand-pole		Three-point support
The rotaion angle		360º
The standard height of the stand-pole(m)		30.5
The diameter of the stand-pole(mm)		F529
The allowed drawing force(kN)		400
The dimension of the total machine(m×m)		10×5.2
The ground contact length of the pedrail(m)		4.5
The width of the pedrail (mm)		800
The lean range of the stand-pole		Front lean9  Back lean5
The climb capacity of the piling frame		4º
The oriented central distance of the stand-pole(mm)		600×F102      330×F70
The vibration hammer	The size of the hammer	DZ60
	The dapth of the piling (m)	26
The screw drilling machine	The applicable model	ZKL800
	The depth of the drill(m)	=26
The hoister	The charging speed(m/min)	25
The walking Mechanism	The walking speed(km/h)	0.25
	The rotation speed (kw)	2×11
The rotation Mechanism	The rotation speed(r/min)	0.25
	The model df the electromotor	ZD31-4-3KW
	The model of the reducer	XLED85-731-3
The adjust structure of the lean-support	The speed of the adjustment line(m/min)	0.55
	The model of the machanism	XLD4-4-1/17
The hydraulic system	Oil pump	CBQ-F550-AFP
	The rated pressure(MPa)	16
	The model of the electromotor	Y180M-4-18.5KW
The ratio pressure   of the ground       (Without the walking equipment)	The support-legs(MPa)	0.38
	The pedrail rail(MPa)	0.07